| SPRAYMIX™
NORMAL FILM COATING
UMANG manufactures and supplies the full
range of Film Coating Systems under the brand name of SPRAYMIX™,
for Normal Film Coating and Functional Coating.
SPRAYMIX™ has a wide range of products
available. Depending upon the requirement, the customer can
take help of our expert advice for choosing the right product
for their application.
| Product |
Description |
Reconstitution
Level |
Average
weight
gain |
Spray
Mix™
AQUA
|
HPMC
based aqueous system |
11%
to 15% |
2.5
% |
Spray
Mix™
SOL
|
HPMC
based organic solvent |
5% |
2.5% |
SPRAYMIX™
UNIVERSAL
|
HPMC
based Aqueous/Organic/Hydro-
Alcoholic System |
Aqueous
– 11%
Organic Solvent- 5%
Hydro- Alcoholic- 9%
|
2.5% |
SPRAYMIX™
AQUA-I
|
HPMC
based Aqueous System |
11%
- 15% |
2.5% |
SPRAYMIX™
SA
|
Sodium
Alginate Aqueous System |
15%
to 20% |
2.5% |
SPRAYMIX™
HERBO
|
HPMC
based Aqueous/Organic System |
Aqueous-15%
to 20%
Organic-5%
|
5% |
SPRAYMIX™
NATCOL
|
HPMC
based Aqueous/Organic System with natural
colorants |
Aqueous-15%
to 20%
Organic-5%
|
5% |
ENTERIC COATING SYSTEM
UMANG has four products for Enteric Coating
suitable for various pharmaceutical solid oral dosage forms
(tablets, capsules, drug loaded pellets, herbal, granules,
Ayurvedic and Nutraceuticals) for protection in Gastric medium.
SPRAYMIX™ products are engineered to maximize performance
and reliability at competitive prices. SPRAYMIX ™ Film
Coating Systems are also available for Aqueous Enteric Coating
of Soft Gel Capsules and for targeted Colonic delivery. The
customers may request our expert technical advice for product
development and application parameters.
| Product |
Description |
Reconstitution
Level |
Average
weight
gain |
SPRAYMIX™
-EN-SOL
|
Organic
Enteric Coating System.
Cellulose Acetate Phthalate based
|
5% |
8
% |
SPRAYMIX™
-EN-HPMC-P
|
Organic
Enteric Coating System.
Hydroxy Propyl Methyl Cellulose Phthalate
based
|
Organic
solvent- 5% |
2.5% |
SPRAYMIX™
EN-AC-I |
A
Enteric Coating System, can be reconstituted
in Aqueous, Methacrylic Acid Co-Polymer
type “c” USP/NF based |
Aqueous
– 20%
|
9% |
SPRAYMIX™
EN-AC-II
|
A
Enteric Coating System reconstituted in Organic
Solvent Methacrylic acid Co-Polymer type “A”
USP/NF based |
Organic
Solvent
6% to 10%
|
9% |
SPECIALITY PRODUCTS
UMANG also manufactures various specialty products for use
in Coating Systems or as a pharmaceutical excipient for direct
compression, wet granulation, binder, disintegrant and dry
granulation. SPRAYMIX™ Colour are the basic aluminum
lake colours or blend of lake colours to meet customized need
of our customers. FD & C Aluminum lake colours are also
available.
| Product |
Description
& Application Examples |
SPRAYMIX™
FLAVOUR
|
Ready
to use Film Coating Systems used to Mask Unpleasant
Odor, Taste of the Core Product. This One Step Ready
to use Product can be used in Aqueous or Organic
Solvent System. Current Flavors available are Chocolate,
Strawberry, Raspberry, Mint, Pineapple, Mango, Orange,
Vanilla Etc.
|
SPRAYMIX™
COLOUR
|
It
is a Dry Colour Blend for Solid Dosage forms. SPRAYMIX
Colour System can be used in Polymer Solution, Sugar
Coating. We are also
supply metallic effect colours for Foods & Pharma.
|
| Spray
Shine™ |
A
Dry Dispersion for Polishing of Sugar Coated and
Film Coated Tablets. It can be Reconstituted in
Aqueous as well as Organic Solvent System. |
SUSTAINED RELEASE
UMANG has different products for manufacture of sustained
release dosage forms, with different polymers. SPRAYMIX™
SR enables to develop the product as per desired release profile
by matrix and or coating process. The release profile and
the process depend on solubility of the drug. SPRAYMIX™
SR is thus customized formulation.
| Product |
Description |
Reconstitution
Level |
Average
weight
gain |
SPRAYMIX™
SR
|
Sustained
Release Coating & Direct Compression System,
Wet Granulation By Organic Solvent
|
5%
to 10% |
Depending
on the Release Profile of the Drug |
MOISTURE BARRIER COATING SYSTEM
UMANG has developed for excellent moisture
barrier coatings for moisture sensitive drugs. SPRAYMIX™
MB Coating System provides good stability and protection for
hygroscopic drugs. SPRAYMIX™ MB products are available
for Hydro Alcoholic system or Organic system depending upon
the active pharmaceutical ingredient and the coating facilities
available at the customers premises.
| Product |
Description |
Reconstitution
Level |
Average
weight
gain |
Spraymix
MB™
|
Organic
Film Coating System Protects the Hygroscopic
Drug Molecules From Atmospheric Moisture without
Affecting the Active Ingredient
|
5%
|
4%
|
NORMAL FILM COATING
PRODUCT RANGE
1) SPRAYMIX AQUA
2) SPRAYMIX SOL
3) SPRAYMIX UNIVERSAL
4) SPRAYMIX AQUA-I
5) SPRAYMIX SA
6) SPRAYMIX HERBO
7) SPRAYMIX NATCOL
8) SPRAYMIX MB
PRODUCT DESCRIPTION
SPRAYMIX™ is dry
dispersion of which consistent colour matching is ensured
by in house colour matching system and it is used for Aqueous
film coating of solid Pharmaceutical Dosage forms prepared
by compressing or molding. SPRAYMIXTM contains film forming
polymers, Plasticizers, Pigments, Opacifier and other necessary
excipients. Plasticizer is carefully selected as per the solvent
system used for coating and as per the drug molecule under
consideration.
SPRAYMIX™ is manufactured as per current
FDA legislation in FDA approved and licensed premises.
SPRAYMIX™ can be made available for
gloss as well as matt finish.
Advantages
• No lengthy process of formulation development.
• Any colour any shade can be consistently made available.
• Single Material inventory/analysis/vendor development
as compared to multi inventory in house system.
• Environment friendly system.
• Ease of preparation, no lengthy hydration time.
• Considerable saving in labour and coating material
with subsequent reduced coating cost.
• Easy to use, easy to clean up.
• Odourless and tasteless.
• SPRAYMIX™ is a customized product and formulated
according to compatibility of the drug.
• SPRAYMIX™ can be used on conventional, as well
as advance coating machine.
• SPRAYMIX™ film coating material can also be
used for solvent system.
SPECIFICATIONS:
Appearance : Complies with standard
pH (2% Slurry in water) : Between 4.0 –
8.0
Particle size (Done on wet slurry) : Not
less than 99.98% w/w passes Through 100mesh seive
Bulk Density : Not more than 0.9 gm/cc
Ash Content : Not more than 35% w/w
Arsenic : Not more than 3 ppm
Heavy Metals : Not more than 10 ppm
Note: Specification can change in accordance
to customers to customers requirement.
|
